Bagster Bike Apron for SYM MIO
The Bagster aprons are fitted on your scooter with straps to be affixed at the front of your vehicle and hence will protect you against the rain and cold.
- Easier access to the ignition key.
- Easy to fold away.
- Better protection of the legs against the rain and cold.
- Total protection of the rider s waist.
If no year is stated then it should fit all years. Please email us to check first.
Each apron is specific to a given scooter. Use the correct anchoring points as shown in the installation instructions. Stretch the straps to bring the main seam up to the fairing. See installation sheet.
- Standard aprons
Start by attaching the strap around the steering column. Fold the apron so that the part made of aluminium coated glass cloth (in grey) is facing the engine. Stretch towards the ground with the laced eyelets level with the footrests. Attach onto the upper part of the engine block, either on a fixed part of the motorbike not exposed to heat, or on the sides of the motorbike, depending on the model that you own.
- Specific aprons
Carefully read the installation instructions.
The apron can alter the way your vehicle handles on the road, especially at higher speeds and in windy conditions. You are strongly recommended to reduce your speed and to be extra cautious.
This is a PVC covered material: only use soapy water with a soft brush and sponge. Keep away from sources of heat. Not recommended: detergents and abrasive products. Regularly spray the seams with waterproofing products. Do not machine wash.
|Fitting Guide||The tank protector has the double vocation to avoid all scrapes and knocks, and to allow the adaptation of tank bags. It is made with a PVC material and foam backed by 5 mm thickness . This material warps much better with a temperature over 20C, ideally exposed to the whole sun or placed in an airing cupboard, the suppleness will make the tank protector easier to fit This process is generally more prevelant in Winter.|
Your Bike: SYM MIO